Saturday, July 31, 2010


- I picked one up from newegg when they were on sale for $100. (UPDATE: That model might be discontinued now. Here is one that seems similar.)
- My current main server was maxed out on drives (5 hdd and 3 optical).
- I wanted a cheap but speedy solution to further expand my storage space. This was mostly for media that was already archived so redundancy/raid wasn't import.
- The key thing I wanted out of this was esata port multiplier.
- The case/fan is very quiet. I can't hear it over my PC at all. I threw in a 2TB seagate 5900 rpm and a 2TB samsung 5400 rpm drive. Drives are barely warm to the touch.
- Drive installation was a snap using just a few thumb screws. Install the drives from bottom to top.
- The pcie 1x card that came with it was: SiI 3132 CN, bios r7.5.07. You can grab the latest bios and drivers from here. 7.7.03 were the latest ones at this time. I flashed the "r" version (update: flash the "b" version if you don't need raid which is what I'm using now.  Monoprice also sells the cards for around $13). The cool thing about how you flash the bios update is you do it right from device properties (device manager, storage controllers, siI 3132, flash bios tab). That is way slick. No need to mess with any bios flash utilities.
- I didn't even bother to install the drivers. If you just want 4 extra drives you don't need to. Though I am burning through a lot of drive letters. If I run out I can simply start using ntfs volume mount points.
- Performance was exactly what I expected. With one drive going I got around 88 MB/sec which is what I expected from these slower spinning hard drives. If I hit both drives at the same time I get around a combined total of 150 MB/sec. From what I understand that is a pcie X 1 bottleneck.
- The esata card has two ports so I still have one port free. I can easily drop in another one of these raid towers for another 4 drives in the future.
- I would stay away from RAID on these cheaper software based raid cards. Performance can be quite unbearable.

Highly recommended! For $100 it's hard to beat. You get full sata speeds if you only hit one drive at a time and even 150MB/sec is plenty for what I need if I happen to hit more than one drive (which is rare in my situation). This totally demolishes the performance of cheaper NAS systems like the dlink 323 (which btw still costs more). If you already got a pc on 24/7 and don't need raid this solution is a no brainer.

UPDATE 4/29/2012:
Power supply blew on it.  A spare one seems to be $60 so I'm not sure if it is even worth it.  I've contacted support to see what my options are.  Luckily, I had a second one and was able to get things back up and running.  I also decided to flash with the "b" for base version of the 7.7.03 bios.  After a reboot you will need install the BASE version of the driver.  After another reboot my drives came back up just fine.


Unknown said...


Well since I just have the exact same enclosure. I would agree with you that it is really a deal, even though it has been discontinued and superseded by another model TR4M-BP on the sans digital website.

I did receive the stock red PCI-X x1 host adapter but later on I replaced it with a syba SD-PEX40029 ( adapter just to get two extra Power-over-Esata ports. Although it was a hasty decision as POE neve really came in handy for me, since it can only seem to supply standard 500-600Ma current over the standard USB port, even when I have connected a power jack from the desktop power supply.

I have also loaded it up with off the shelf standard HDD and my configuration is as follows:

-Dell Optiplex 755 Core2Duo Desktop 8GB RAM.

-Windows 7 32-bit Ultimate.

-TowerRAID TR4M-B.

-Syba-SDPEX40029 with latest firmware from Silicon Image website.

-All 4 drive bays loaded in JBOD (individual drive letter mode)

- 1-2 TB each Seagate and Western Digital consumer class HDDs.

I purchased the unit about one year ago and since then it has been working fine.

Until recently I have noticed that the unit restarts itself suddenly during read or write operations. The power is connected however it reinitialized itself for no apparent reason. All the HDD LEDs are turned off for a while and then initialized one by one, during that time the PC freezes and becomes inaccessible.

I have double checked and the PCI-e (x1) slot on my motherboard is ok and card is securely installed in it. If it would have been bad then it would not work at all.

The problem might not be with the E-sata cables, since the card is initialized in the BIOS startup routine and not dependent on the cables.

Just wanted to know if it has occured with you and if there was any solution you have applied to it.

Although i have read on the SansDigital website that we should use only enterprise class HDD in this enclosure for RAID. But the question is if I am not using RAID and just JBOD then is it still necessary.

Thanks for any ideas

Unknown said...

I intended to write you one little remark in order to say thanks a lot once again for those pleasing tricks you've provided in this article. It was unbelievably generous with people like you to grant unhampered what many of us could possibly have marketed as an e book to generate some profit for their own end, chiefly seeing that you could have tried it if you ever decided. These good tips in addition acted to provide a good way to be sure that other individuals have the identical dreams like my personal own to know the truth a lot more pertaining to this problem. I think there are millions of more pleasant situations in the future for people who look over your website.

The best dj controller Lady!